BIS CRS Registration for CCTV Camera is an important product compliance requirement for CCTV manufacturers, importers, surveillance-system brands, security equipment companies, distributors, and foreign manufacturers planning to sell CCTV cameras and CCTV recorders in India.

CCTV Cameras and CCTV Recorders are listed under the Bureau of Indian Standards Compulsory Registration Scheme - Scheme II under the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021. BIS's current Scheme II list shows the product category against IS/IEC 62368 (Part 1): 2023, following the 2026 transition from the earlier safety standard.

CCTV cameras are also subject to the notified Essential Requirements for Security of CCTV - ER 01:2024. MeitY clarified in February 2026 that the CCTV security requirements under the Compulsory Registration Order became effective from 9 April 2025, in addition to the applicable safety requirements.

Therefore, CCTV compliance in India should now be approached as more than a basic electrical-safety test. Manufacturers need to assess the applicable safety standard, CCTV cybersecurity/security requirements, BIS-recognised laboratory testing, product models, manufacturing location, and CRS application before commercial sale or import.

A BIS CRS Consultant can help businesses manage the complete process from product classification and testing to application filing, model inclusion, foreign manufacturer support, and post-registration compliance.

What is BIS CRS Registration?

CRS stands for Compulsory Registration Scheme.

It is operated by BIS under Scheme II of the BIS Conformity Assessment Regulations for notified electronics and information technology products.

Under the scheme, applicable products cannot simply be manufactured, imported, sold, or distributed in India without meeting the prescribed standard and registration requirements.

A practical CCTV compliance process is:

Product Assessment → Applicable Standard → Security Requirement Assessment → Laboratory Testing → BIS CRS Application → Registration → BIS Marking → Sale / Import in India

For CCTV cameras, product security testing has become an important part of this compliance framework.

Is BIS Registration Mandatory for CCTV Cameras?

Yes. CCTV Cameras and CCTV Recorders are included in the compulsory registration list maintained by BIS.

The current BIS Scheme II list identifies:

Product Category: CCTV Cameras / CCTV Recorders

Current Safety Standard: IS/IEC 62368 (Part 1): 2023 - Audio/Video, Information and Communication Technology Equipment - Part 1 Safety Requirements.

Because BIS requirements have transitioned from the older IS 13252 (Part 1):2010 framework, manufacturers with older registrations or test documentation should verify the applicable transition requirements rather than relying on an old test report.

Important 2026 Update for CCTV BIS Registration

Businesses researching CCTV BIS requirements may still find older online information referring to:

IS 13252 (Part 1): 2010

That was the earlier safety standard used for CCTV Cameras/CCTV Recorders.

However, BIS's current compulsory registration list reflects IS/IEC 62368 (Part 1):2023 for this product category following amendments notified in March 2026.

This means a manufacturer preparing a new CCTV application in 2026 should confirm the latest BIS transition and testing position before sending products to a laboratory.

Using an outdated standard can result in:

• Wrong testing
• Additional laboratory cost
• Application queries
• Product launch delays
• Re-testing

Regulatory assessment should therefore come before laboratory booking.

What is ER 01:2024 for CCTV Cameras?

ER 01:2024 refers to the Essential Requirements for Security of CCTV.

These requirements were introduced because modern CCTV cameras, especially IP-based cameras, are network-connected devices that may store, process, or transmit sensitive video and data.

The notified requirements address cybersecurity and product-security areas such as:

• Physical security
• Authentication
• Access control
• Role-Based Access Control
• Network security
• Encrypted communication
• Software security
• Strong password policies
• Firmware security
• Secure update mechanisms
• Protection of stored information
• Reduction of unnecessary exposed services

The objective is to reduce cybersecurity vulnerabilities in CCTV equipment.

Why CCTV Security Testing is Important

Traditional product certification focused mainly on electrical and electronic safety.

But modern CCTV products can include:

• Network interfaces
• Mobile applications
• Cloud connectivity
• Remote access
• Wi-Fi
• Ethernet
• Firmware
• Local storage
• User accounts
• APIs
• Video streams

A vulnerable CCTV camera could potentially expose:

• Video footage
• Login credentials
• Network information
• Stored recordings
• Device controls

For this reason, manufacturers now need to consider cybersecurity during product design rather than only at the certification stage.

BIS Safety Testing vs CCTV Security Testing

These should be treated as separate but connected compliance areas.

Safety Testing

Evaluates conformity with the applicable product safety standard, currently reflected by BIS as IS/IEC 62368 (Part 1):2023 for CCTV Cameras/CCTV Recorders.

CCTV Security Testing

Evaluates the CCTV product against the notified Essential Requirements for Security.

BIS currently lists a separate uniform test-report format for ER 01:2024 - Essential Requirements for Security of CCTV in addition to its product test formats.

Manufacturers should therefore develop a complete testing plan before submitting samples.

Who Needs BIS CRS Registration for CCTV Cameras?

The requirement may affect:

• Indian CCTV manufacturers
• CCTV OEM factories
• CCTV brands
• CCTV camera importers
• Security equipment companies
• Foreign CCTV manufacturers
• IP camera manufacturers
• CCTV recorder manufacturers
• Surveillance equipment businesses
• Private-label CCTV brands

However, the manufacturer is central to the CRS registration process.

A trader or importer should not assume that obtaining a certificate in the trading company's name replaces the manufacturer's BIS registration.

Who is the BIS CRS Applicant?

Under CRS, the manufacturer is generally the applicant for registration.

BIS's registration procedure states that product test reports should be issued in the name of the actual manufacturer and identify the manufacturing unit and factory address.

This is particularly important for private-label businesses.

For example:

Brand Owner: ABC Security India

Actual Manufacturer: XYZ Electronics Factory

The regulatory application needs to correctly identify the entity that actually manufactures the CCTV camera.

BIS Registration for Imported CCTV Cameras

Indian importers sourcing CCTV cameras from overseas factories should assess BIS compliance before shipment.

A recommended sequence is:

Foreign Manufacturer → BIS CRS Testing → CCTV Security Testing → BIS Registration → Import Order → Shipment → Customs Clearance

Importing first and trying to obtain BIS registration after the consignment arrives can create:

• Customs detention
• Storage charges
• Demurrage
• Re-export risk
• Product launch delays

The foreign manufacturing factory should therefore be brought into the BIS process before regular commercial imports begin.

BIS CRS for Foreign CCTV Manufacturers

Foreign CCTV manufacturers can obtain CRS registration for products manufactured outside India, subject to the applicable BIS requirements.

An overseas manufacturer generally needs an Authorised Indian Representative (AIR) located in India to coordinate its regulatory responsibilities.

The manufacturer's information should remain consistent across:

Factory Documents → Test Report → AIR Documents → BIS Application → Product Label

A mismatch in the factory name or address can delay registration.

What is an Authorised Indian Representative?

An AIR represents the foreign manufacturer for BIS compliance in India.

The representative should meet applicable BIS eligibility requirements and formally accept the regulatory responsibility associated with the role.

The AIR should not be confused with:

• Distributor
• Dealer
• Brand owner
• Customs agent

unless that entity has actually been nominated in accordance with BIS requirements.

Can an Indian Importer Become AIR?

Depending on the corporate relationship and applicable BIS conditions, an eligible Indian entity may be nominated as the foreign manufacturer's representative.

However, the arrangement should be reviewed before filing.

The business should clearly establish:

• Foreign manufacturer
• Factory
• Indian importer
• Brand owner
• AIR

so that there is no confusion about regulatory responsibility.

Step 1: Confirm the Product is a CCTV Camera

Before laboratory testing, the product should be correctly classified.

Information should include:

• Product name
• Model
• Camera type
• Network capability
• Power input
• Connectivity
• Recording functionality
• Accessories
• Intended application

Examples can include:

• IP camera
• Analog CCTV camera
• Dome camera
• Bullet camera
• PTZ camera
• Network surveillance camera

The final classification should depend on product functionality rather than only marketing terminology.

Step 2: Identify the Applicable BIS Standard

The current standard should be confirmed before testing.

For new CCTV CRS compliance in 2026, BIS currently lists:

IS/IEC 62368 (Part 1):2023

for CCTV Cameras/CCTV Recorders.

Because regulatory transitions can involve deadlines and implementation conditions, the applicable position should be verified for the exact application date.

Step 3: Review CCTV Security Requirements

The manufacturer should conduct a cybersecurity gap assessment against ER 01:2024.

Review areas may include:

• Default passwords
• Authentication
• User privileges
• Open network ports
• Encryption
• Firmware
• Firmware update mechanism
• Remote access
• Device storage
• Debug interfaces
• Network protocols

This should ideally happen before the product enters the formal laboratory.

Step 4: Conduct Pre-Compliance Testing

Pre-testing can help identify failures before the official certification testing begins.

For example, the manufacturer may discover:

• Weak password policy
• Unnecessary network port
• Unencrypted communication
• Insecure firmware update
• Accessible debug interface
• Authentication weakness

Correcting these problems before formal testing can reduce repeated laboratory cycles.

Step 5: Select a BIS-Recognised Laboratory

CRS product testing should be performed through an appropriate laboratory recognised by BIS for the relevant scope.

BIS specifically states that CRS applicants should follow the prescribed CRS process for product testing, and its Registration Scheme requires test reports from recognised laboratories for registration.

The laboratory should have the required scope for the testing being requested.

Step 6: Submit CCTV Samples for Safety Testing

Representative samples are submitted for evaluation against the applicable safety requirements.

The manufacturer should ensure that the tested product represents the model intended for registration.

Major design changes after testing can affect the validity of the assessment.

Step 7: Complete ER 01:2024 Security Testing

The CCTV product must also be evaluated against the applicable security requirements.

The manufacturer should provide accurate information regarding:

• Hardware
• Firmware version
• Software
• Communication interfaces
• Login systems
• Network services
• Update mechanisms

Security testing can uncover issues that are not visible during conventional electrical-safety testing.

Step 8: Prepare BIS CRS Documents

The exact documentation depends on the manufacturer and product.

Common information can include:

• Manufacturer legal details
• Factory address
• Product information
• Model numbers
• Test reports
• Trademark or brand details
• Authorised signatory information
• Manufacturing documents
• AIR nomination documents for foreign manufacturers
• Other CRS declarations and supporting records

All information should remain consistent.

Step 9: File the BIS CRS Application

After obtaining complete testing documentation, the manufacturer submits the registration application through the applicable BIS CRS process.

BIS's current laboratory FAQ directs CRS applicants to the CRS portal for account creation and registration procedures.

The application should clearly identify:

• Manufacturer
• Factory
• Product category
• Standard
• Models
• Test reports

Step 10: Respond to BIS Queries

BIS may seek clarification if there are discrepancies in:

• Manufacturer name
• Factory address
• Model
• Test report
• Trademark
• Product details
• AIR information
• Other declarations

Responses should be consistent with the original testing and manufacturing records.

Step 11: Obtain BIS CRS Registration

After satisfactory evaluation, BIS may grant registration for the approved product and manufacturing arrangement.

The manufacturer should then follow the applicable Standard Mark and registration-number requirements before selling regulated products.

BIS Marking for CCTV Camera

A registered CCTV product needs to follow applicable BIS marking requirements.

The manufacturer should ensure that the marking is:

• Legible
• Associated with the registered product
• Consistent with BIS requirements
• Supported by a valid registration

Using another manufacturer's BIS number on an unrelated product is not acceptable.

BIS Registration for CCTV Camera Models

CCTV manufacturers often have many models with similar designs.

For example:

• 2 MP Camera
• 4 MP Camera
• 5 MP Camera
• 8 MP Camera
• Different lens variants
• Different housing designs

Depending on applicable BIS product grouping guidelines and technical similarity, certain models may be handled as a product series.

However, businesses should not assume that unlimited models can be covered by testing one camera.

The assessment may depend on:

• PCB
• Power design
• Critical components
• Enclosure
• Network functionality
• Firmware
• Safety design

Model grouping should therefore be planned before testing.

Can One BIS Registration Cover Multiple Brands?

Brand and trademark arrangements need to be correctly declared during the CRS process.

An OEM factory may manufacture CCTV cameras for multiple Indian brands.

For example:

Manufacturer: XYZ Electronics

Products may be marketed as:

• Brand A
• Brand B
• Brand C

The applicable BIS process for brand inclusion should be reviewed before products are labelled and shipped.

Can One Registration Cover Multiple Factories?

BIS registration is associated with the manufacturing unit identified in the application and test documentation.

If the same CCTV model is manufactured at different factories, separate regulatory treatment may be required.

Businesses should therefore map:

Factory 1 → Models

Factory 2 → Models

before building the certification strategy.

CCTV Camera vs CCTV Recorder

BIS lists the product category as:

CCTV Cameras/CCTV Recorders

This can include surveillance recording equipment within the notified product category.

However, the exact product should still be assessed to determine:

• Product classification
• Applicable testing
• Models
• Interfaces
• Security requirements

A camera and recorder should not automatically be treated as the same hardware design simply because they appear in the same notified product category.

BIS CRS for IP CCTV Cameras

IP cameras can require additional attention because they connect directly to networks.

These products may contain:

• Ethernet
• Wi-Fi
• Cloud services
• Web interfaces
• Mobile applications
• APIs
• Firmware
• Remote access

As a result, the ER 01:2024 security assessment is particularly important.

Cybersecurity should be considered during product development rather than added just before testing.

BIS CRS for Analog CCTV Cameras

Analog CCTV cameras should also be assessed under the notified CCTV product category where applicable.

Although their connectivity may differ from IP cameras, the current BIS requirements and exact security-testing applicability should be reviewed according to the product configuration.

The technology should be clearly explained to the laboratory and consultant before testing.

BIS Registration for CCTV Recorders

Security systems frequently include:

• DVR
• NVR
• Hybrid recorder
• Network video recorder

Manufacturers and importers should assess the appropriate BIS CRS coverage for these products.

The product's:

• Power supply
• storage
• interfaces
• network functionality
• firmware
• recording capabilities

should be documented accurately.

CCTV Power Adapter BIS Requirement

Many CCTV cameras use an external power adapter.

If the adapter itself falls under a compulsory BIS product category, its own compliance should be checked separately.

Therefore:

CCTV Camera BIS Registration ≠ Automatic Power Adapter Registration

Critical components should be reviewed before product testing and shipment.

WPC ETA for Wireless CCTV Cameras

A CCTV camera containing wireless technologies such as:

• Wi-Fi
• Bluetooth
• Other RF connectivity

may also need assessment under the WPC ETA framework depending on its radio specifications and applicable licence-exempt frequency requirements.

Therefore, an imported wireless CCTV product may need:

BIS CRS + CCTV Security Compliance + WPC ETA

where applicable.

One approval does not automatically replace another.

E-Waste EPR for CCTV Importers and Producers

Businesses placing covered electrical and electronic equipment on the Indian market should also assess their obligations under India's E-Waste (Management) Rules, 2022.

Depending on product coverage and business model, a CCTV producer or importer may need to evaluate:

• E-Waste EPR registration
• EPR targets
• Annual reporting
• Recycling obligations

BIS registration addresses product conformity; E-Waste EPR addresses end-of-life environmental responsibility.

LMPC Compliance for Packaged CCTV Products

If CCTV cameras are imported and sold as applicable pre-packaged commodities, Legal Metrology requirements may also need to be assessed.

Declarations can include matters such as:

• Importer information
• Country of origin
• Product name
• Quantity
• MRP
• Consumer-care details

Therefore, for packaged imported CCTV products, the compliance matrix may include:

BIS + Security ER + WPC + E-Waste EPR + LMPC

depending on applicability.

BIS CRS for CCTV OEM Manufacturers

OEM manufacturers producing CCTV cameras for other brands should plan registration carefully.

The regulatory records should clearly establish:

• Actual manufacturer
• Factory
• Tested models
• Brands
• Product specifications

A brand owner should not simply obtain a supplier's BIS certificate and assume every camera supplied by that factory is automatically covered.

The specific model and approved scope need to be verified.

Importers Should Verify Supplier BIS Registration

Before placing a purchase order, an importer should verify:

• Manufacturer name
• Factory address
• Registration status
• Product category
• Model coverage
• Applicable standard
• Brand
• Validity

This reduces the risk of purchasing products that cannot be legally imported or sold under the supplier's claimed registration.

Documents Commonly Required for CCTV BIS CRS

Depending on the manufacturer and application, documents may include:

• Manufacturer registration documents
• Factory address proof
• Product information
• Product photographs
• Model list
• PCB or technical information, where required
• Critical-component information
• Trademark details
• Test reports
• Security test documentation
• Authorised signatory details
• AIR nomination documents for overseas manufacturers
• Other BIS declarations

The final checklist should be confirmed against the current CRS requirements.

How Long Does BIS CRS Registration for CCTV Take?

The overall timeline depends on:

• Product readiness
• Laboratory availability
• Safety testing
• Security testing
• Test failures
• Documentation
• Model grouping
• BIS queries
• Foreign manufacturer documentation

Manufacturers should avoid committing to a product launch date before confirming laboratory and regulatory timelines.

Security testing can make early product preparation particularly important.

BIS CRS Registration Cost for CCTV Camera

The total cost can include:

• BIS application charges
• Safety testing
• ER 01:2024 security testing
• Model testing
• Professional consultation
• AIR-related support for foreign manufacturers
• Re-testing where required

Laboratory fees can vary significantly depending on the product and test scope.

The business should therefore finalise the:

Model List + Factory + Standard + Security Scope

before preparing a complete certification budget.

Does CE or FCC Replace BIS Registration?

No.

A CCTV camera may already carry certifications such as:

• CE
• FCC
• RoHS
• International safety reports

but foreign certifications do not automatically replace mandatory Indian BIS CRS requirements.

A manufacturer intending to sell a product in India should assess the Indian regulatory requirements independently.

Can an Importer Apply for BIS Instead of the Manufacturer?

Under CRS, the manufacturer is generally the entity around which registration and testing are structured.

The test report should identify the actual manufacturing unit.

An importer can coordinate the process and may serve as the Indian representative in an eligible foreign-manufacturer arrangement, but the importer should not simply substitute itself for the actual factory.

Common Mistakes in BIS Registration for CCTV Cameras

Common problems include:

• Following the old IS 13252 standard without checking the 2026 transition
• Ignoring ER 01:2024 security testing
• Testing before model grouping
• Wrong manufacturer name
• Factory address mismatch
• Test report issued for the wrong manufacturing unit
• Assuming CE certification replaces BIS
• Importing before registration
• Using another manufacturer's BIS number
• Not checking power adapter compliance
• Ignoring WPC for wireless cameras
• Ignoring E-Waste EPR
• Adding models without checking registration scope
• Firmware changes that affect security compliance

A regulatory review before laboratory testing can reduce many of these issues.

Benefits of Hiring a BIS CRS Consultant for CCTV Camera

Professional consulting can help manufacturers and importers with:

• CCTV BIS applicability
• Current standard assessment
• 2026 transition review
• ER 01:2024 assessment
• CCTV security-testing coordination
• BIS-recognised laboratory coordination
• Product model grouping
• Test documentation
• BIS CRS application
• Foreign manufacturer support
• AIR documentation
• BIS query response
• Model inclusion
• Brand assessment
• WPC ETA assessment
• E-Waste EPR coordination
• Import compliance review

This is particularly useful for manufacturers managing multiple CCTV models and regular product updates.

Why Choose Green Permits for BIS CRS Registration for CCTV Camera?

Green Permits Consulting supports CCTV manufacturers, surveillance equipment brands, importers, OEM manufacturers, foreign factories, distributors, and technology companies with BIS and product compliance in India.

Green Permits can assist with:

• BIS CRS Registration for CCTV Camera
• CCTV Recorder BIS Registration
• IS/IEC 62368 (Part 1):2023 Compliance
• ER 01:2024 CCTV Security Compliance
• BIS Laboratory Testing Coordination
• CCTV Cybersecurity Testing Support
• Product Model Grouping
• Foreign Manufacturer Registration Support
• AIR Coordination
• BIS Query Response
• Model and Brand Inclusion
• WPC ETA Assessment
• E-Waste EPR Compliance
• LMPC Compliance
• Complete CCTV Import Compliance

Our approach connects product classification, safety testing, cybersecurity requirements, BIS registration, wireless compliance, EPR, and import readiness instead of treating BIS as a standalone certificate.

Learn More About BIS CRS Registration for CCTV Camera

If you manufacture or import CCTV cameras, IP cameras, surveillance cameras, DVRs, NVRs, or CCTV recording equipment in India, reviewing the current BIS safety standard and ER 01:2024 security requirements before laboratory testing can help prevent re-testing, application delays, and import compliance issues.

Read more about BIS certification and product compliance services here:

👉 https://www.greenpermits.in/09/bis-crs-registration-for-cctv-cameras-in-india-guide/

📞 Get Expert Assistance for BIS CRS Registration for CCTV Camera

If you need help with BIS CRS Registration for CCTV Camera, IS/IEC 62368 compliance, ER 01:2024 security testing, CCTV model grouping, foreign manufacturer registration, AIR support, WPC ETA, or CCTV import compliance, Green Permits Consulting can assist you.

🌐 Website: www.greenpermits.in

📞 Phone: +91 78350 06182

📧 Email: [email protected]

Book a consultation with Green Permits Consulting for BIS CRS registration and CCTV product compliance support in India.