If you have a Netgear Orbi and all of a sudden see an Orbi blinking red power light, it might get scary.  A red light normally means that the router is experiencing a significant issue might not be so yet. Usually, just walking through a few steps of troubleshooting will fix the problem.

Meaning of The Orbi's Blinking Red Power Light

A red power LED usually signals a serious problem with the firmware, hardware, or boot process of the device. It usually occurs after a botched update, outage of power, or corrupted system data. So basically, your router is alerting you that it cannot boot properly.

Quick Fixes Worth Trying

Power Cycle the Orbi:

• Unplug the power adapter from the router.
• Wait for around 30 to 60 seconds.
• Plug the power adapter back in and allow the system to boot up again.
• Sometimes all that is needed is a simple reboot to fix the bug.

Reset Orbi Router:

• If the reboot does not fix the issue, then resort to a factory reset.
• Find the reset button (usually a tiny pinhole).
• Hold for 10-15 seconds, until the power light blinks.
• This will revert the system to default, so you will have to set up your WiFi once again.

Orbi Firmware Update

• One of the red blinking light problems could be caused by obsolete or faulty firmware.
• Log in to the Orbi app or web interface when it has successfully restarted.
• On Administration > Firmware Update, check for updates and install the latest version.

Check Out the Power Supply

• A faulty power adapter would cause the red light.
• Ensure that your router is connected to a reliable power supply.

The Orbi flickering red power light does not necessarily mean that your gadget is dead. Most of the time, you will get your system up and running again in no time by simply rebooting, resetting your Orbi router, and checking for the latest Orbi firmware update.

Visit our website for more information.